Il mercato; tutte le auto prebelliche in vendita

This is an original 12 volt CAV running board mounted horn, Condition is generally good - some light indentations and overall tarnishing and plating loss. Length 17.5 inches. Distance between mounting brackets 8.5 inches.

A Gabriel large three-pipe exhaust whistle. This is about 40"total length, 7 1/2" tall and the tubes are 1 3/4 " in diameter.  It has original nickel plated over the brass. It has the original Gabriel tag which is nice and crisp.  This appears to be all original, never touched and there are no dents or damage. It has the original "L" shaped connect..

This large Rubes 3/4 twist horn is about 10" tall and is about 6" wide. This is the style with the large bell and rim. It can be used on a right or left-hand early automobile. The original tubing is about 40" long. It's in great condition. Complete with the thumb nuts, screen, adapters, reed, etc. Honks well. The rubber bulb is obviously squished. ..

A large and early triple horn that is 11" tall and about 6" wide. It is made by SMA Le Cyrano, Paris. It is in excellent condition and an older restoration. It was clear coated years ago. This is a great brass horn that would date from about 1905 to 1911ish. It could be used for an important American or European automobile. The price is 250.00 USD...

MG N type aluminium cylinder head that has sat on the shelf for about 10 years. It came off a running car that had the engine rebuilt and the cylinder head replaced with an original cast iron version. It appears in good condition, although will need complete strip down. Buyers will have to consider transport costs on top of negotiated purchase pric..

The Fulton Co. Four Chime Aermore Exhaust Horn / Whistle Four chime automobile exhaust horn with the tallest chime measuring 21 1/2" tall and a 1 3/8" inlet. The top is stamped "The Fulton Co. No. 00 Aermore Exhaust Horn". Very good, original condition. The price is 195.00 USD plus shipping. Please call at 734-730-4274 or email directly at: motorin..

Aermore No. 0 four tube whistle with a Fulton cutout. The cutout has the two-butterfly valve. The inlets have been modified from approximately from 2 3/4 ID to a 2 1/2" threaded inlet with a 1 3/4" ID inlet adapter. The valve needs to be soaked to loosen. The whistle is in very good original condition with nickel plating over brass. Overall length ..

2 model A Ford – Sparton 6 volt 1 Klaxonet 12 volt1 Handklaxon.All worksEur 150 each + shipping

Reconditioned Test bench running - not installed after test Polished

Klaxon horn in good, working condition. Total lenght 24 cm. New made bracket. Very good "aoogha" sound.