This is a rare Miller Master racing carburetor with a rotary throttle body, it is in excellent condition and has been recently run on a car, the carburetor is made of brass / bronze and has a steel inlet body.
The carb outlet to engine bore dia is 30mm and the mounting holes are 62mm centres.
These are a pair of Left & Right Rudge-Whitworth splined hubs and finned brake drums. The left and right hubcaps are still fitted, one cap has a hole drilled in it, but it's otherwise good. The fins have a couple of chip and nicks but are otherwise OK.The finned internal brake drum at 258mm in internal diameterI can send more photos on request,..
An early Solex Carburettor suitable for an Amilcar, Salmson, French lightcar or Cyclecar. 26mm In good condition, but missing its float sadly. Just email if you need further details.
for sale nice original holley model k carburettor
as used on the ihc and Studebaker etc
looking complete and whit minimal wear
fore more pictures and info pleas ask
An Amilcar G-type, also CGS and CGS3 and perhaps other models, rear main bearing housing together with its rear main bearing. In general the housing is in excellent condition and does not appear to have any serious damage that is often caused by incorrect removal proceedure.
As can be seen there is one damaged mounting lug on the housing. It sho..
Solex bronze carburetor MHD 30, used for instance by Bugatti and Lea Francis .
Will be delivered as shown, with floater and extra spare jet nozzles with different jet bore size.
Floater 43 grams, pressure tested (no air bubbles if submersed in hot water).
An original Zenith 36U updraft carburettor in good useable condition. It has a brass identity plate marked TYPE 36UP, No 3260 ZENITH. Buyer pays shipping costs.